Company Profile
Contact Us
Call us on 07777237785
Featured Products
Userful Links
Fire Protection Systems
Design & Installation
Inspection & Maintenence
Fire Suppression System
Fire Extinguishers
Safety Signage
Fire Protection Systems
Design & Installation
Inspection & Maintenence
Fire Suppression System
Fire Extinguishers
Safety Signage
Information
Company Profile
Contact Us
Sitemap
Fire Supp
ression System
Fire Extinguishers
Safety Signage
Company Profile
Contact Us
Sitemap
Fire Supp
ression System
Fire Extinguishers
Safety Signage
Reliance Fire Safety E.A. Ltd
Turskys Jirani, Basement suite no. 5
Eastern Bypass, Overpass / Kangundo Rd Junction
P.O.B OX 626100300, Nairobi
Phone: 254 (0) 208002968
Cell: +254 (0) 07718388495
Email: info@reliancefireea.com
Turskys Jirani, Basement suite no. 5
Eastern Bypass, Overpass / Kangundo Rd Junction
P.O.B OX 626100300, Nairobi
Phone: 254 (0) 208002968
Cell: +254 (0) 07718388495
Email: info@reliancefireea.com
Get Social With Us
Categories
Eaton Detectors and bases
CF3000 Range Intelligent Addressable Control Panel
CTPR3000 Addressable Range - Fire Alarm Repeater Panel
Eaton BiWire Ultra Detectors and Bases
Eaton BiWire Ultra Manual Call Points
Eaton BiWire Ultra Sounders and Flashers
CTPR3000 Addressable Range - Fire Alarm Repeater Panel
Eaton BiWire Ultra Detectors and Bases
Eaton BiWire Ultra Manual Call Points
Eaton BiWire Ultra Sounders and Flashers
Order Now
The optical sensor (CAP320) is suitable for most applications giving the fastest response to slow burning or smouldering fires which give rise to large visible smoke particles.
The photo-thermal sensor (CAPT340) will respond quickly to fast clean burning fires yet maintain the advantage of optical sensors when detecting smouldering fires. The thermal enhancement of this sensor allows a higher alarm threshold which provides a greater rejection of false alarms. The sensor will also raise an alarm at temperatures exceeding 60ºC.
The heat sensor (CAH330) can be set to one of 3 modes 77ºC / 92ºC and rate of rise. These sensors are designed to be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.
The photo-thermal sensor (CAPT340) will respond quickly to fast clean burning fires yet maintain the advantage of optical sensors when detecting smouldering fires. The thermal enhancement of this sensor allows a higher alarm threshold which provides a greater rejection of false alarms. The sensor will also raise an alarm at temperatures exceeding 60ºC.
The heat sensor (CAH330) can be set to one of 3 modes 77ºC / 92ºC and rate of rise. These sensors are designed to be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.
